Skip to content
LiveAutoParts — Used Auto Parts
OEM TOYOTA POWERTRAINS · TESTED & WARRANTIED

Used & Remanufactured
Toyota Tundra Engines

Get an exact-fit, tested replacement engine for your Toyota Tundra. We source low-mileage complete drop-in, long block, and short block units tested for compression, leak-down, and oil pressure. Every quote is verified against your 17-digit VIN before purchase.

✓ Compression & Leak-Down Tested: All cylinders within 10% tolerance
✓ Hot-Idle Oil Pressure Verified: Bearings and internal clearances checked
✓ Documented Donor Mileage: Clean salvage records with zero flood history
✓ Exact Engine Code Matching: EcoBoost, Coyote 5.0L, 2.7L, Duratec & Diesel
📞 Call 1 (855) 831-7111 — Speak with a Specialist Mon–Fri 8am–7pm EST • Instant VIN Fitment Lookup
✓ Nationwide Freight Shipping with Liftgate Service
✓ Up to 3-Year Warranty Coverage Available
✓ Compression & Oil Pressure Verified
✓ 8th VIN Digit Match Guaranteed
Powertrain Options

Toyota Tundra Engine Families & Configurations

The Toyota Tundra has featured multiple iconic engine architectures across modern generations. Match your truck's exact displacement, cylinder configuration, and model year below:

Short Block Engine
Bottom-End Repair

Short Block Assembly

Cylinder block, crank, connecting rods, and pistons.

For vehicles with sound cylinder heads and reusable external parts.
Scope & Included Components

What's Included: Short Block vs. Long Block vs. Complete Drop-In

Before ordering a replacement Toyota Tundra engine, understand exactly what arrives on the freight pallet. Choosing the right scope prevents duplicate labor charges at your repair shop.

Engine Short Block Assembly
Tier 1: Rotating Assembly

Short Block Assembly

Includes machined cylinder block, crankshaft, connecting rods, pistons, and bearings. Heads and external components transfer from your original engine.

Engine Long Block Assembly
Tier 2: Most Popular Choice

Long Block Assembly

Includes short block plus tested cylinder heads, camshafts, valvetrain, timing chain kit, oil pump, and front timing cover. Ready for your intake/exhaust.

Complete Drop-In Turnkey Engine
Tier 3: Turnkey Fast Swap

Complete Drop-In Assembly

Fully dressed complete engine with intake manifold, fuel rail, injectors, exhaust manifolds, sensors, valve covers, and turbos (where applicable).

Engine Component / Assembly Short Block Long Block (Most Popular Tier) Complete Drop-In
Engine Block Casting (CGI / Aluminum / Cast Iron) ✔ Included ✔ Included ✔ Included
Crankshaft, Rods, Pistons & Bearings (Rotating Assembly) ✔ Included ✔ Included ✔ Included
Cylinder Head(s) & Valvetrain (Valves, Springs, Retainers) ✘ Transfer Yours ✔ Included & Tested ✔ Included & Tested
Camshaft(s) & Variable Cam Timing (VCT) Phasers ✘ Transfer Yours ✔ Included & Inspected ✔ Included & Inspected
Timing Chain, Guides, Tensioners & Front Cover ✘ Install New Set ✔ Installed & Timed ✔ Installed & Timed
Oil Pump, Pickup Tube & Oil Pan ⚡ Optional / Varies ✔ Included ✔ Included
Valve Covers & Gasket Surfaces ✘ Transfer Yours ✔ Included ✔ Included
Intake & Exhaust Manifolds ✘ Transfer Yours ✘ Transfer Yours ✔ Attached
Fuel Rail, High-Pressure Injectors & Fuel Lines ✘ Transfer Yours ✘ Transfer Yours ✔ Attached & Tested
Turbocharger(s) & Wastegate Actuators (EcoBoost / Diesel) ✘ Transfer Yours ⚡ Sourced Separately ✔ Attached Units
Best Suited For Repair Type: Bottom-end bearing knock when heads & valvetrain are confirmed undamaged. Standard catastrophic failure, head gasket failure, or overheating replacement. Fastest install with lowest shop labor hours; fire/water damage replacements.
Engine Quality Control

How We Test & Inspect Every Toyota Tundra Engine

Jasper and OEM standards require verified numbers, not just a casual "it ran" statement. Every used and remanufactured engine undergoes a structured 6-point technical audit before crating.

⚙

Cam Phaser & VCT Solenoid Check

Variable cam timing actuators are checked for internal lock pin engagement and cold-start rattle — addressing the most common complaint on early 3.5L EcoBoost and 5.4L 3-valve Triton engines.

🔗

Timing Chain Stretch & Guide Audit

Timing sets are measured for link pin wear, hydraulic tensioner pressure, and plastic guide integrity. Any excessive slack or chain elongation is flagged and replaced prior to final delivery.

🔍

Borescope Cylinder & Valve Inspection

Digital borescopes inspect cylinder wall cross-hatching, piston crowns, and direct-injection intake valves. We confirm zero scoring, ring wear, or excessive intake valve carbon buildup.

📊

Dynamic Compression & Leak-Down Audit

Per-cylinder compression figures are documented. We mandate that cylinder pressures balance within 10% of each other, verifying airtight valve seating and piston ring seal.

🛢

Hot-Idle Oil Pressure & Bearing Tolerance

Oil pressure is verified under simulated hot-idle conditions. Main and connecting rod bearing clearances are confirmed within strict factory tolerances to rule out bearing knock or oil starvation.

🌀

Turbocharger Shaft Play & Oil Seal Audit

On EcoBoost twin-turbo platforms, turbocharger compressor and turbine wheels are inspected for axial play, housing contact, carbonized oil return passages, and wastegate arm freedom.

Simple 4-Step Process

How Your Toyota Tundra Engine Replacement Works

From initial VIN match to pallet delivery at your repair shop, our logistics are straightforward and transparent:

01

Submit Your Vehicle VIN

Provide your 17-digit VIN and preferred scope (short block, long block, or complete). We decode the exact engine code and emissions level.

02

Fitment & Quality Audit

An engine specialist reviews verified donor records, compression readings, mileage documentation, and oil pressure test data.

03

Receive Itemized Written Quote

You receive the exact final price, warranty coverage options, and freight delivery timeline. No hidden core fees or surprises.

04

Crated Freight Delivery

Your engine is securely drained, shrink-wrapped, banded to a heavy-duty pallet, and shipped via freight with liftgate service to your shop or driveway.

Got Questions?

Frequently Asked Questions About Toyota Tundra Engines

Technical guidance on fitment, replacement tiers, warranty protection, and delivery logistics:

How do you verify fitment for my Toyota Tundra engine? ▾

We verify fitment using your vehicle's 17-digit VIN, factory engine code, and emissions label. We ensure the block, cylinder heads, and sensor configurations match your truck's PCM.

What testing is performed before the engine ships? ▾

Every engine undergoes compression testing across all cylinders, cylinder leak-down verification, cold spin oil pressure checks, and borescope inspection of cylinder walls and valvetrain.

What is the difference between a long block and a complete engine? ▾

A long block includes the block, crankshaft, pistons, cylinder heads, camshafts, and timing components. A complete engine includes intake and exhaust manifolds, sensors, fuel rail, and attached accessories.

What warranty comes with the replacement engine? ▾

All engines come with written warranty protection covering internal lubricated parts. Extended warranty options and return terms are confirmed in your itemized quote before purchase.

Ready to Get Your Toyota Tundra Back on the Road?

Speak directly with an automotive engine specialist. We will verify your 17-digit VIN, confirm current inventory options, and provide a comprehensive itemized quote with warranty and liftgate freight included.

📋 Get a Quote 📞 Call