Used Toyota RAV4 Rear Axle Assembly
Request a VIN-matched quote for a used Rear Axle Assembly. Availability, condition, warranty, and shipping are confirmed for your exact vehicle before purchase.
- ✔ Used-part options
- ✔ Add your VIN for fitment review
- ✔ Review warranty terms in the quote
- ✔ Confirm payment method before purchase
Part Details
Your quote request is reviewed against your vehicle details. Before buying, ask for the condition description, mileage when relevant, warranty terms, shipping cost, and final price so you can compare the available options.
Quote status: Live stock and public prices are not displayed. Request a vehicle-specific quote to review the available option and its final terms.
Compatibility: Toyota RAV4
Condition & Quality Standards
Condition grading and inspection practices vary by part and source. Before purchase, request the available condition description, mileage information when relevant, photos, and any inspection or test notes.
About This Rear Axle Assembly
The rear axle assembly carries the differential, axle shafts and bearings that drive the rear wheels. A used axle assembly is an efficient fix for a howling differential, bad bearings or a bent housing, and comes pre-set with the correct gear mesh. Gear ratio is the single most important fitment key, and it is not always what the factory build code claims. Confirm it from the metal tag bolted to the differential cover — a stamp such as 3 42, or 41-11 meaning 41 ring-gear teeth divided by 11 pinion teeth (3.73). On GM trucks and SUVs the glovebox or door-jamb RPO sticker lists it as a code — GU6 is 3.42 and G80 is a locking axle. Because an axle bolts out easily, that build code only proves the original ratio; a swapped or re-geared housing will not match it, so verify the physical unit rather than trusting the sticker. Rear axles also come in two carrier styles that do not interchange: a drop-out third member, where the whole ring-and-pinion assembly pulls out the front as one piece (Ford 9-inch, many Toyota and Mopar rears), and an integral carrier serviced through a bolt-on rear cover (GM 10- and 12-bolt). On four-wheel and all-wheel drive the rear ratio must also match the front axle exactly — a part-time transfer case locks both driveshafts together with no way to absorb a speed difference, so a mismatched ratio binds the drivetrain and can damage the transfer case.
Because every rear axle assembly quote is matched to your Toyota RAV4 by VIN, you get a part that fits the first time and keeps your repair on budget.
Want the full picture before you buy? Read our used rear axle assembly buying guide.
Before you order, it helps to read:
Common Signs Your Rear Axle Assembly May Need Replacing
- Howling or roaring from worn gears or bearings
- Clunk on acceleration or deceleration
- Grease or gear oil at the axle seals
- Wheel wobble from a bent housing
Symptoms vary by vehicle and driving conditions. Always confirm diagnosis before replacement.
What to Check When Buying a Used Rear Axle Assembly
- Match the gear ratio and brake type
- Confirm the axle width and spline count
- Check the housing for straightness
- Inspect bearings, seals and the ring gear
- Identify the carrier style — a drop-out third member vs an integral rear-cover carrier — they are not interchangeable
- On 4WD or AWD, match the ratio to the front axle exactly
- Confirm the ABS tone-ring and wheel-speed-sensor style — it can sit on the axle, the bearing seal or the rotor
- Photograph the axle tag, differential cover, brake backing plates, ABS sensors and spring/link mounts before removal
Ask for these details and any available photos before approving a purchase.
What Happens After You Request a Quote
- We review your vehicle and part request
- Provide your VIN or full vehicle details for fitment review
- Review the available condition, warranty, shipping, and price details
- You decide — no obligation to buy
Response time depends on the part, vehicle information supplied, and current sourcing options.
Related Parts in Transmission & Drivetrain
Browse other quality used parts in this category:
Request Availability & a Quote
Get an exact match for your vehicle.
Availability & Quote Details
- Live stock and public pricing are not displayed for this Rear Axle Assembly
- Available condition, fitment, warranty, shipping, and final pricing are confirmed only after we review your request
- Ask for warranty and return terms in writing before you buy
- Shipping options are confirmed for the destination and part size
Check Current Availability
We do not display unverified stock records. Send your VIN or year, make, model, and original part number so a specialist can confirm exact fitment and the options currently available.
How Pricing Is Determined
Pricing for used rear axle assembly depends on several factors:
- Vehicle year, make, model, and engine configuration
- Mileage and overall condition of the donor vehicle
- Supplier location and shipping distance
- Warranty coverage offered
Price depends on the gear ratio, whether brakes and ABS sensors are included, and the axle width for your model. A third-member axle and a locking (limited-slip) unit typically cost more than an open integral axle.
Confirm the final price and fitment basis before approving a purchase.
Frequently Asked Questions
Is a complete used axle easier than rebuilding mine?
Often yes — a complete assembly arrives with the gear mesh already set, avoiding the specialized setup a rebuild requires.
Do I need to match the axle width?
Yes, the track width, ratio and brake setup all must match your vehicle for correct fitment and handling.
How do I find my rear axle gear ratio?
Read the metal tag bolted to the differential cover — a stamp like 3 42 or 41-11 (41 ring teeth divided by 11 pinion = 3.73). On GM trucks the glovebox RPO sticker lists it as a code such as GU6 (3.42). If the tag is gone, pull the cover and count the ring and pinion teeth, or spin the driveshaft and count its turns per one wheel revolution.
Will a different-ratio axle work in my vehicle?
On two-wheel drive a different ratio bolts in, but it changes your effective gearing, acceleration and engine RPM at cruising speed, so it is not a true match. On four-wheel or all-wheel drive it is worse — a ratio that differs from the front axle binds the locked drivetrain and can damage the transfer case, so it must match exactly.
Is a whining rear end the axle or something else?
A steady whine or howl that changes with vehicle speed usually points to worn ring-and-pinion gears or pinion bearings inside the axle. Noise tied to engine load, or that comes and goes only in turns, can instead be a wheel bearing, a U-joint or a CV axle, so have it diagnosed before replacing the whole assembly.
Why did my ABS light come on after fitting a used rear axle?
Usually the wheel-speed signal rather than the gears. The toothed ring that generates it can sit on the axle shaft, the hub, the rotor or drum, or the differential pinion, so a used assembly can arrive with its own. A ring with a different tooth count makes that sensor read fast or slow against the others and sets a code, damaged teeth leave gaps in the signal, and a lost wheel-speed input disables ABS and lights the lamp.
Does a used rear axle arrive with gear oil in it?
Do not assume it does - confirm it on your quote and treat the refill as part of the job. An axle that arrives dry has to be filled to the vehicle maker's specification before the vehicle moves, or the ring and pinion and the bearings run dry. The figures are exact: Ford's 2022 E-Series manual calls for the Dana rear axle to be filled 0.24 to 0.55 in below the bottom of the fill hole with an 80W-90 gear oil meeting Ford WSP-M2C197-A.
Semi-float or full-float - does it matter which used rear axle I get?
Yes - it changes what carries the weight, and it can decide which internals fit. ARB describes a semi-float as having the vehicle's weight riding on the axle shaft and its wheel bearing; on a full-float the weight rides on a wheel hub and bearing and the shaft carries none of it. Semi-float is the half-ton pattern, full-float the three-quarter-ton and heavier one, and ARB notes the axle type can decide which locker is selected.
How is compatibility verified?
Provide your VIN or full vehicle details so you can review the fitment basis in your quote before approving a purchase.
What if the part does not fit?
Most suppliers offer limited return or exchange options. Warranty and return terms are confirmed before purchase.
How long does shipping take?
Shipping time varies by location, part size, and freight arrangement. Confirm the dispatch and delivery estimate in your quote.
