Used Toyota Highlander Parts
Request a quote for used Toyota Highlander parts—engines, transmissions, electrical, and body components. Share your VIN or full vehicle details and review fitment, condition, warranty, shipping, and final pricing before purchase.
About Used Toyota Highlander Parts
The three-row Highlander is a high-volume family SUV, so used engines, transmissions, AWD parts and body panels are easy to source — but fitment turns on the engine code, generation and gas-versus-hybrid, not the '3.5L' badge. Read the engine code off the block and match your VIN before buying, because the powertrain changed across generations and the hybrid's high-voltage parts don't cross to a gas Highlander.
Generations & fitment boundaries
The generation and platform decide whether a used part interchanges. Match yours before you request a quote.
- 2008–2013 (XU40 (second gen)) — 3.5L 2GR-FE V6 as the volume engine, with a 2.7L 1AR-FE four-cylinder base added for 2009 and a V6-based Highlander Hybrid. Early-build V6s carry the oil-line concern below.
- 2014–2019 (XU50 (third gen)) — carry-over 3.5L 2GR-FE V6 through 2016, then the updated 3.5L 2GR-FKS (D-4S direct injection) from the 2017 refresh; the 2.7L four and V6 hybrid continued early in the run. The 2016/2017 V6 change is the boundary that breaks interchange.
- 2020–present (XU70 (fourth gen, TNGA-K)) — the gas Highlander used the 3.5L 2GR-FKS V6 for 2020–2022, then switched to a 2.4L turbo four (T24A-FTS) for 2023; a 2.5L four-cylinder hybrid runs alongside. This generation's parts are a clean break from XU40/XU50.
Engines & transmissions — how to tell them apart
For 2008–2022 the Highlander's core engine is the 3.5L V6, but there are two different V6s. Through about 2016 it's the port-injected 2GR-FE; from the 2017 refresh it's the 2GR-FKS with Toyota's D-4S direct/port injection. They share the 2GR family but differ in fuel system and electronics, so they are not a plug-and-play swap — crossing that line needs the matching ECU and usually harness work. From 2023 the gas Highlander moved to the 2.4L T24A-FTS turbo four, a completely different engine. Order by the code stamped on the block, not by '3.5L.'
The 2GR-FE is a shared Toyota engine that also lives in the Camry, RAV4, Sienna and Lexus RX 350, which widens the donor pool — but accessories, brackets and oil pan can differ by vehicle, so a same-code engine still has to be VIN-matched. On the XU40 you may also find the 2.7L 1AR-FE four-cylinder base engine, a different family entirely.
Driveline and hybrid split the parts further. The Highlander comes in front-wheel drive and all-wheel drive, and AWD-specific parts (transfer/coupling, propshaft, rear differential and rear-suspension pieces) don't carry over from a FWD car. The Highlander Hybrid runs its own electrified transaxle, high-voltage battery, inverter and an electric rear axle — those are hybrid-only parts and must not be sourced from or for a gas model.
Known issues that drive used-part demand
- Early 3.5L 2GR-FE V6s (roughly built up to April 2008) use a rubber VVT-i oil supply hose that can degrade and leak, risking low oil pressure — covered by Toyota's Limited Service Campaign that updated the hose to a metal line on affected models. On a used early-XU40 V6, confirm the metal-line update or have a mechanic inspect it before buying.
- The V6 water pump and timing-chain-area seals are wear items worth having a mechanic inspect on a high-mileage 2GR engine. When pricing a used long block, factor whether these have been serviced.
Safety- and emissions-related parts should be diagnosed and installed by a licensed mechanic.
Most-requested used Highlander parts
The most-asked Highlander questions are 'will a 2015 V6 fit a 2018?' and 'do hybrid parts fit my gas one?' The V6 answer is no across the 2016/2017 line — 2GR-FE and 2GR-FKS have different fuel systems and controllers — and a 2023+ gas Highlander is a turbo four, not a V6 at all. The hybrid answer is no for anything electrified. A used engine's ECU carries the immobilizer, so it has to be reprogrammed to your keys or the anti-theft system blocks starting. Send your VIN and the engine code and we'll match a tested unit.
Browse more used Toyota parts, or search by VIN for an exact Toyota Highlander match.
Popular Used Toyota Highlander Parts
Get a free, no-obligation quote on common Toyota Highlander components:
Looking for other Toyota models? See all used Toyota parts.
Why Buy Used Toyota Highlander Parts?
A used part can be a lower-cost alternative to new OEM for a Toyota Highlander. Compare condition, fitment, warranty and return terms, shipping, and final price before deciding whether an option is right for your repair.
- Vehicle details — include your VIN or full Toyota Highlander configuration for fitment review.
- Terms before purchase — review the written warranty and return terms.
- Shipping options — confirm the applicable method, timing, and cost for your destination.
New to buying used? Read our buying guides or how to decode your VIN.
Used Toyota Highlander Parts — FAQ
Will a 2GR-FE V6 interchange with a 2GR-FKS Highlander?
Not directly. Through about 2016 the Highlander V6 is the port-injected 2GR-FE; from the 2017 refresh it's the direct-injected 2GR-FKS. They share the family but use different fuel systems and electronics, so crossing the split needs the matching ECU and often harness work. Match by engine code and VIN.
Do Highlander Hybrid parts fit a gas Highlander?
Not the powertrain parts. The hybrid has its own transaxle, high-voltage battery, inverter and electric rear motor that a gas Highlander doesn't have. Body panels and many chassis parts share; the electrified components do not. Confirm gas vs hybrid by VIN.
Is the Highlander gas engine always a V6?
No. The gas Highlander used the 3.5L 2GR family through 2022, but the 2023-and-newer gas model uses a 2.4L T24A-FTS turbo four — a different engine entirely. Read the code off the block and match by VIN before ordering.
Will a 3.5L V6 fit my 2006 Highlander that has the 3.3?
No. EPA lists the 2006 Highlander V6 as a 3.3L on a 5-speed automatic, while by 2010 EPA lists the V6 as a 3.5L, and Toyota's LSC 90K paperwork identifies certain 2008 Highlanders as 2GR-FE V6 cars. The 3.5 arrived with the newer generation, so it is not a bolt-in for a 3.3 car. Order by the engine code stamped on the block, not by the words 3.5L V6.
My 2.7L Highlander needs a transmission - will a V6 one fit?
No. EPA lists the 2.7L four-cylinder Highlander as front-wheel drive only with a 6-speed automatic, while the 2010 3.5L V6 used a 5-speed and came in front- or all-wheel drive. The four-cylinder's transaxle, mounts and axles are its own, so the donor has to be another 2.7 car. Send the VIN with your quote request so the drivetrain matches.
Is a used fuel pump from a 2018 Highlander safe to buy?
Check the donor car's recall status first. NHTSA recall 20V-012 covers 2018-2019 Highlanders among other Toyota and Lexus models whose in-tank low-pressure fuel pump has an impeller that can deform, causing check engine and warning lights, rough engine running, no-start or a stall while driving. Toyota's report says the remedy is provided at no charge to owners. A pump pulled from an unremedied car carries the same defect.
What engine is in a Highlander Hybrid - is it the 3.5 V6?
It depends on the year, which is why hybrid engines get mis-ordered. EPA lists the 2010 Highlander Hybrid with a 3.3L V6, the 2016 with a 3.5L V6 and the 2021 with a 2.5L four, each on a variable-ratio hybrid transaxle rather than the gas car's automatic. Confirm model year and hybrid status by VIN before sourcing an engine or transaxle.
More used Toyota parts by model
Same supplier network, matched to a different Toyota.